What to do next??

[Perkul8r]

I was thinking that too. But than he has a decent deal on that fmic. Its a hard decision. lol. It would only be about three weeks before i could get the dsmlink. And i still gotta see what ecu my car has. I dont know if its an eprom or not. I gotta take it out and look.

[19TsiAwd90]

ebay fmic's work fine, if your not gonna me making more than 400 hp this one should be fine

http://cgi.ebay.com/ebaymotors/FMIC-...Q5fAccessories


or this one

http://cgi.ebay.com/ebaymotors/2-5-I...Q5fAccessories

[Andrew7dg]

Link is nice but if you are on a budget I found out that my 650s/2g mas/safc is working really well and i didn't spend that much money on any of them.

Just throwing that out there.

550s with 2g mas are the preferred route as I heard that you don't need to use a safc.

I just remember when I changed my exhaust and turned up the boost on the 14b my car hit fuel cut all the time. Switching to a bigger injector and a 2g or safc will fix that.

It all depends on how much of a budget you have

[19TsiAwd90]

well link v3 lite is only 345$ and you can run 1000cc injectors with no issues and even switch to e85 if you want like i am

[turbotalon1g]

I would run a chip if you are on a tight budget, I have heard nothing but good about Shane's chips I believe his 61mm car runs on chips.
I know if it comes time for tuning and the $$$ isn't about I would go about it that way.

I would do the FMIC and then turn up the boost on teh 14b, they are going solid mid to low 12s and that will be awesome from your current setup.
Then my next big purchase would be tuning software.

[19TsiAwd90]

there are many diffrent orders to modd and which ever suits you best or you wanna do then do it, just have fun,
+2 on shanes chips i concidered it but wanted to have link anyways hehe

[turbotalon1g]

^Why are you whoring up this guys thread when you have no clue what to do yourself?

[19TsiAwd90]

I know what I'm doing.. i have talked to shane and got my shit figured out not "whoring" just adding my 2cents
no need to flame dude calm yourself..

[CarPsyco84]

Since when was knowing what your talking about ever a requirement on this forum...

[Perkul8r]

Well, as long as things go my way, I will be making enough money doing side jobs to get both the FMIC and a DSMlink. And maybe even some other things. Now i just need to find a 67-69 camaro for my uncle. lol. Easy task right.

[turbotalon1g]

hahaha carpsyco

[Perkul8r]

So i got bored and went outside to see if i per chance had an eprom ecu in my car. Well, i dont. lol. But on the good side, it looks like the caps may have been replaced at some time. It doesn't look like the pics of the other ecus i have seen.