Dave's Evo X Build/The Life of Dave blog - Page 30

**Murlo26** · 06-10-2010

Hmmm, sounds bad...any vids of said noise, i haven't heard that obviously. I am guessing myself or lomker would've heard that if my car was making it.

**Shane@DBPerformance** · 06-10-2010

http://www.youtube.com/watch?v=SlZvt...eature=related

http://www.youtube.com/watch?v=hMWwk...eature=related

Or Tom's car.

**Murlo26** · 06-10-2010

I was busy helping scheides with the dyno day when that happened and didn't get to hear it...i'll check out the vids

**Murlo26** · 06-10-2010

Yea, i didn't hear anything like that...but it is really hard to hear shit over my exhaust so who knows.

Swifty1638 · 06-11-2010

Alex handed me your piston when I was helping with some other car, and I was like.."is that Dave's?!" wooaa dude. going over your motor today, in a SMALL way, made me feel SORT OF better about mine..it was well enough to race over to BK for lunch..lol.

I know the new build will be better then before.

**mlomker** · 06-11-2010

Quote:

Originally Posted by Murlo26

Yea, i didn't hear anything like that...but it is really hard to hear shit over my exhaust so who knows.

I wouldn't have noticed since I'm not sure what 'normal' is for your car since it was my first time in it. Back when I had that UR fuel filter on my firewall it would make bizarre sounds...the 3port, a different set of injectors, motor mounts..they all make different sounds.

I remember when I first picked up my own car after the initial build and my only thought was 'damn that test pipe is loud'. Now I'm totally use to it.

**scheides** · 06-11-2010

Quote:

Originally Posted by ecoli

Unless it was an oiling problem and it spun a rod bearing and didn't hear it and once the bearing was totally gone the rod stuck to the crank and beat the up the block.

Well unbolt the end of the rod that's left on there and see what it looks like, that would solve that mystery pretty quick, unless it was damaged when the rod snapped.

**Murlo26** · 06-11-2010

Just bought some new Buschur Center Diff pins to upgrade them in the tranny since it is out now anyway.

**Murlo26** · 06-15-2010

Small update:

The Buschur diff pins should arrive to my house today and I am going to bring them up to DB so they can get my tranny over to their guy and get those put in.

All of the components for my head have been ordered and will probably show up late this week, early next week I am guessing. The Manley springs/retainers are going to Supertech ones, because the GSC S2 cams that I got have too much lift for the Manley ones, the supertechs are only like 100 more or something.

**scheides** · 06-15-2010

wtf, the specs on the S2's aren't insane, how can the manley springs not work? on the 8/9 they're only slightly more aggressive than k272's, which work fine with stock springs. Maybe the dual mivec X cams have some crazy ramp rates or something?

*edit* ya, I see in their catalog it says max lift of .430" = 10.9mm....kinda silly imho. The evo8/9 springs are good for .580" = 14.7mm! How can they make such MANLY springs for the 4G63 and such PUSSY springs for the X?

turbotalon1g · 06-15-2010

hey dave u brought/kno that guy who had g8 gt at the dyno day right?

they made pussy stuff for pussys. lol jk jk

**Murlo26** · 06-15-2010

Quote:

Originally Posted by scheides

wtf, the specs on the S2's aren't insane, how can the manley springs not work? on the 8/9 they're only slightly more aggressive than k272's, which work fine with stock springs. Maybe the dual mivec X cams have some crazy ramp rates or something?

*edit* ya, I see in their catalog it says max lift of .430" = 10.9mm....kinda silly imho. The evo8/9 springs are good for .580" = 14.7mm! How can they make such MANLY springs for the 4G63 and such PUSSY springs for the X?

Yea not sure, the GSC S2's are like .433 or something, so just a bit over the Manley max lift, Danny said we could probably still use them, but since I plan to rev it out he thought it was better to go with the Supertech's which can handle like .49 or something.

But I looked at the 8/9/X S2's and they are all about the same lift and designed for roughly the same rev range and power levels...400-700whp.

Quote:

Originally Posted by turbotalon1g

hey dave u brought/kno that guy who had g8 gt at the dyno day right?

they made pussy stuff for pussys. lol jk jk

Yea, he is my buddy...second part, you lost me, lol.

**Murlo26** · 06-17-2010

Good bye stock turbo

But here is where it is going...

FP Rebuild Form

Hopefully I will have this the first or second week in July, just in time for the motor to be going back in

turbotalon1g · 06-18-2010

hahaha, thats funny. Its looks like a kids note to santa.

You know drew O. too? That second part was for scheides about the X springs.

**mlomker** · 06-18-2010

Quote:

Originally Posted by Murlo26

Hopefully I will have this the first or second week in July, just in time for the motor to be going back in

500 or bust.

**Murlo26** · 06-18-2010

^Couldn't of said it better myself

**Murlo26** · 06-18-2010

Quote:

Originally Posted by turbotalon1g

hahaha, thats funny. Its looks like a kids note to santa.

You know drew O. too? That second part was for scheides about the X springs.

Robert@FP is just as good as Santa

turbotalon1g · 06-18-2010

^lol, 500 is crazy. I need to get a ride in all these Evos.

**Murlo26** · 06-18-2010

I will dish out rides when it is all said and done...however, I am graduating my car to only myself driving it simply because I can't afford to fix another motor right now and a misshift at 9k would be deadly. too much to lose.

500whp would be sweet, but i might get stuck in the upper 4's until i finish some other things off that might be restrictions, intake mani, throttle body and I will go to a tubular mani eventually too. Probably winter project...then shoot for 500's next spring. I honestly just want the damn thing to work, lol.

**Murlo26** · 06-21-2010

My new "1400cc" DW injectors will be here tomorrow, my head is off to DB's machinist for his raceport job and +1mm valve installation with my new GSC s2 cams and supertech springs/retainers. The buschur diff pins and my tranny went to DB's tranny guy for installation and while he has it all apart if anything looks worn he is going to replace.

My stock turbo will be at FP Wednesday, so hopefully 2 weeks or so and he will ship it back. The Shortblock is due in port the end of this week or early next week, so hopefully end of next week or early the following week that will be at DB. Hopefully everything falls into place and the head/tranny are done before the shortblock gets there and then the FPblack arrives when the motor is going back in.

It seems to be going smoothly...almost too smoothly.

Edit: Also ordered a Thermal intake spacer, was going to do Boomba, but MAP had the same thing for like half the price from them so I just got that one. Also ordered my second piece of bling, aside from my Perrin shorty antenna that was my first mod, a boomba oil cap!