MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Tuning/Electrical

Reply
 
Thread Tools Display Modes
Old 05-07-2011   #1
justinhill
 
BetHiLow Streak Un-Censored Champion! League Bowling Champion! Snowboard Champion!
Join Date: Apr 2007
Location: St.Paul
Drives: 98 gst eclipse
Posts: 261
Send a message via AIM to justinhill
No spark on cylinder 1 and 4

Like the tittle says, put in a new coil new power thing next to the coil, has new crank sensor car starts and runs on 2 and 3. any input what it is? Could it be a bad CAS?
justinhill is offline   Reply With Quote
Old 05-07-2011   #2
95talonracer
Finally Tuned...
 
95talonracer's Avatar
 

Join Date: Apr 2006
Location: Zimmerman
Drives: Spyder GSX
Posts: 2,484
Send a message via MSN to 95talonracer
Re: No spark on cylinder 1 and 4

ECU maybe or cas
__________________
94 Supra TT Auto, Project 9.xx in the works
97 Spyder AWD 6 bolt 2.3, 579hp 496tq **FOR SALE**

Amsoil Dealer
95talonracer is offline   Reply With Quote
Old 05-07-2011   #3
CornFed2.4
 
CornFed2.4's Avatar
 

Join Date: May 2005
Location: Linwood, MN
Drives: You crazy!
Posts: 2,354
Send a message via AIM to CornFed2.4
Re: No spark on cylinder 1 and 4

I had the same problem. I forgot to install my cam postioning sensor. See the cam sensor runs one pack and the crank sensor runs the other pack. Looking at the motor if you left pack is doing nothing but the right one is then its your cam sensor. if the right one does nothing but the left one does then its the crank sensor. Least thats what it was on mine.
if it is your cam sensor make sure that you remembered to install it and plug it in. If you forgot to install it you can put it in without taking your belt off but you have to be very carefull and loosen the cam sprocket and pull it off just enough to stick the sensor in there. Its hard to do but I managed to get it done so I know you can do it.

^^^ Quoted right from talk^^^

You need to find a working cas

Last edited by CornFed2.4; 05-07-2011 at 10:53 PM..
CornFed2.4 is offline   Reply With Quote
Old 05-08-2011   #4
justinhill
 
BetHiLow Streak Un-Censored Champion! League Bowling Champion! Snowboard Champion!
Join Date: Apr 2007
Location: St.Paul
Drives: 98 gst eclipse
Posts: 261
Send a message via AIM to justinhill
Re: No spark on cylinder 1 and 4

New CAS,switch coils,switch power transistor still no spark.
justinhill is offline   Reply With Quote
Old 05-08-2011   #5
turbotalon1g
 
turbotalon1g's Avatar
 

Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
Send a message via AIM to turbotalon1g
Re: No spark on cylinder 1 and 4

I was going to say the power transistor.
__________________
Aaron/brownman/big brown.
'91 Automagic.
'02 Z06
Please leave feedback - http://www.dsmtuners.com/forums/itrader.php?u=58309
turbotalon1g is offline   Reply With Quote
Old 05-08-2011   #6
Goat Blower
aka Goodbye
 
Goat Blower's Avatar
 
Asteroids Champion! Beach Squirter Champion!
Join Date: Oct 2003
Location: under the car
Drives: Taylor Made R15
Posts: 7,765
Re: No spark on cylinder 1 and 4

Swap the wires from 1-4 to 2-3 and see if the problem follows the switch.
__________________
2009 Corvette Z51-SOLD
1992 Mitsubishi Eclipse GSX-SOLD
2013 BMW Z4-Current summer hooptie
2017 GMC Yukon-Current winter hooptie

Goat Blower is offline   Reply With Quote
Old 05-08-2011   #7
justinhill
 
BetHiLow Streak Un-Censored Champion! League Bowling Champion! Snowboard Champion!
Join Date: Apr 2007
Location: St.Paul
Drives: 98 gst eclipse
Posts: 261
Send a message via AIM to justinhill
Re: No spark on cylinder 1 and 4

update: I pulled the plugs on 1 and 4 and i'm not getting gas to 1 and 4. Is there a certain way the Crank sensor suppose to go in? and the cam sensor? when I replace the cam sensor I lined the timing up and the little paint mark with the sensor, was i suppose to line the crank sensor up with the timing on mark also could that cause no spark in 1 and 4?
justinhill is offline   Reply With Quote
Old 05-08-2011   #8
justinhill
 
BetHiLow Streak Un-Censored Champion! League Bowling Champion! Snowboard Champion!
Join Date: Apr 2007
Location: St.Paul
Drives: 98 gst eclipse
Posts: 261
Send a message via AIM to justinhill
Re: No spark on cylinder 1 and 4

how does my ecu look?
justinhill is offline   Reply With Quote
Old 05-14-2011   #9
justinhill
 
BetHiLow Streak Un-Censored Champion! League Bowling Champion! Snowboard Champion!
Join Date: Apr 2007
Location: St.Paul
Drives: 98 gst eclipse
Posts: 261
Send a message via AIM to justinhill
Re: No spark on cylinder 1 and 4

Ok, I got this narrowed down... I went through the whole harness patching/replacing wires,New crank sensor,Changed out CAS,Changed out Coil packs,Changed out power transistor,new wires and plugs . All I need is someone that can test my ecu in there running car to see if thats the problem also would a bad injector resistor pack cause to no fuel and spark to 1 and 4? I been going at this for the last 8 days for at least 8-10 hours a day this is getting stressful...
justinhill is offline   Reply With Quote
Old 05-14-2011   #10
CornFed2.4
 
CornFed2.4's Avatar
 

Join Date: May 2005
Location: Linwood, MN
Drives: You crazy!
Posts: 2,354
Send a message via AIM to CornFed2.4
Re: No spark on cylinder 1 and 4

bring ur ecu up to my place and I can see if it works. Ill be around tomorrow so text me if that works. 651-269-2314
CornFed2.4 is offline   Reply With Quote
Old 05-17-2011   #11
justinhill
 
BetHiLow Streak Un-Censored Champion! League Bowling Champion! Snowboard Champion!
Join Date: Apr 2007
Location: St.Paul
Drives: 98 gst eclipse
Posts: 261
Send a message via AIM to justinhill
Re: No spark on cylinder 1 and 4

still no spark on 1 and 4. Switch ECU,switch Injector resistor,switch coil packs,switch power transistor, new cam sensor,new crank sensor,new spark plug wires... patched up wires up still nothing now i'm stuck what there to try next?
justinhill is offline   Reply With Quote
Old 05-17-2011   #12
95talonracer
Finally Tuned...
 
95talonracer's Avatar
 

Join Date: Apr 2006
Location: Zimmerman
Drives: Spyder GSX
Posts: 2,484
Send a message via MSN to 95talonracer
Re: No spark on cylinder 1 and 4

Wire harness. Is there any sketchy areas on the harness that look like they could be frayed or shorted?
__________________
94 Supra TT Auto, Project 9.xx in the works
97 Spyder AWD 6 bolt 2.3, 579hp 496tq **FOR SALE**

Amsoil Dealer
95talonracer is offline   Reply With Quote
Old 05-17-2011   #13
justinhill
 
BetHiLow Streak Un-Censored Champion! League Bowling Champion! Snowboard Champion!
Join Date: Apr 2007
Location: St.Paul
Drives: 98 gst eclipse
Posts: 261
Send a message via AIM to justinhill
Re: No spark on cylinder 1 and 4

Got it fixed turns out to be the Ecu and both of my power transistors where bad. Thanks to cornfed2.4 for all the help!
justinhill is offline   Reply With Quote
Old 05-17-2011   #14
CornFed2.4
 
CornFed2.4's Avatar
 

Join Date: May 2005
Location: Linwood, MN
Drives: You crazy!
Posts: 2,354
Send a message via AIM to CornFed2.4
Re: No spark on cylinder 1 and 4

Not a problem. I really didnt do much but hand ya some parts! Now only if I could figure mine out But at least it threw a code again!
CornFed2.4 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:08 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.