MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Turbo / Engine / Drivetrain

Reply
 
Thread Tools Display Modes
Old 03-16-2016   #1
Halon
Pewp Champion
 
Halon's Avatar
 

Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
Send a message via AIM to Halon
Push Connect Vacuum Lines?

Anyone here used these? Lots of options between Amazon, eBay, and McMaster Carr. Looking for anyone with experience using these that can recommend fittings and hose that works well and lasts in the underhood environment, and is decently flexible and doesn't turn hard as a rock in winter.

Here's kind of what I was looking at.

Plastic Fittings:
http://www.mcmaster.com/#push-to-con...tings/=11k470q

DOT approved black nylon hose:
http://www.mcmaster.com/#nylon/=11kkpyh
__________________
B-Man - FlexFuel Mafia
1991 TSi AWD E85 - BEP S362, DSMLink V2, Built 2.0L Idle Vid 628hp Graph 541hp Vid 10.93@137 Vid
1992 SC300 E85 - BW 84-75, Vlad Infinity, NA-T, 6spd Idle Vid 709hp Graph 709hp Vid 11.1@131 Vid
2006 Bayliner 195 - Carbed 5.0 Top Speed Test
Halon is offline   Reply With Quote
Old 03-16-2016   #2
19TsiAwd90
2stepadepaaadepaaadep
 
19TsiAwd90's Avatar
 

Join Date: Aug 2010
Location: bloomington, Mn
Drives: myself crazy
Posts: 822
Re: Push Connect Vacuum Lines?

my buddy uses them on his drag car, they hold 45psi without leaking. im not sure how it would be in the winter though, probably pretty brittle. the line is about as flexible as nylon-braided hose, but can kink if doing too sharp of an angle/turn.
__________________
Quote:
Originally Posted by 311evo
I put more into my car then what its worth, did it for my own enjoyment and that was all.
^^thats what modding is about.. your own enjoyment
19TsiAwd90 is offline   Reply With Quote
Old 03-17-2016   #3
C3L1CA
N17r0U$ br4D
 
C3L1CA's Avatar
 
Goosehead Racing Champion! Street Drifting Champion!
Tournaments Won: 1

Join Date: Apr 2007
Location: Oakdale, MN
Drives: bikes and a silveraydo
Posts: 2,749
Re: Push Connect Vacuum Lines?

http://jhfoster.com/contact/

Thats where I got my fittings and line like that for my air shifter on my motorcycle. I pressurize that thing to 150psi before every run and never had a leak and the line is still flexible. I just told them what size I want and what I was going to use it for and they brought out a few different samples and I picked what I thought was best.

Give them a call and I'm sure they can hook you up with what you need.
__________________
My rice rocket best times
Pump Gas: 8.85 @ 152.3 in 2016
Race Gas: 8.982 @ 152.16 in 2014

Last edited by C3L1CA; 03-17-2016 at 07:42 AM..
C3L1CA is offline   Reply With Quote
Old 03-17-2016   #4
Halon
Pewp Champion
 
Halon's Avatar
 

Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
Send a message via AIM to Halon
Re: Push Connect Vacuum Lines?

Oh that's awesome man thanks. Do you know any of part numbers or anything about what you ended up using, so I could tell them that's kind of the route I'm thinking?
__________________
B-Man - FlexFuel Mafia
1991 TSi AWD E85 - BEP S362, DSMLink V2, Built 2.0L Idle Vid 628hp Graph 541hp Vid 10.93@137 Vid
1992 SC300 E85 - BW 84-75, Vlad Infinity, NA-T, 6spd Idle Vid 709hp Graph 709hp Vid 11.1@131 Vid
2006 Bayliner 195 - Carbed 5.0 Top Speed Test
Halon is offline   Reply With Quote
Old 03-17-2016   #5
Speedfreak
 

Join Date: Jul 2004
Location: MN
Drives: four tires
Posts: 1,608
Re: Push Connect Vacuum Lines?

Brandon, FYI, we used these guys a lot at PaR, guessing you guys use them at Systems as well potentially. Not sure if they get preferential pricing or not...
__________________
NSX - S480/Built motor
GSX - 571whp/490wtq
Sienna
Speedfreak is offline   Reply With Quote
Old 03-17-2016   #6
turbotalon1g
 
turbotalon1g's Avatar
 

Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
Send a message via AIM to turbotalon1g
Re: Push Connect Vacuum Lines?

man u are going baller on this shit.
__________________
Aaron/brownman/big brown.
'91 Automagic.
'02 Z06
Please leave feedback - http://www.dsmtuners.com/forums/itrader.php?u=58309
turbotalon1g is offline   Reply With Quote
Old 03-17-2016   #7
Halon
Pewp Champion
 
Halon's Avatar
 

Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
Send a message via AIM to Halon
Re: Push Connect Vacuum Lines?

I just want to clean up the vacuum mess. Right now there's lines all over, different sizes, different brands, some vacuum some fuel, Tee-s all over with zip ties clamping them with the ends kind of cut that scratch the fuck out of my arm. So I just want to redo it. I might just use normal vacuum hose again and just make it cleaner, but thought maybe something like this wouldn't really cost all that much more to do, and be nicer, cleaner, and sealed super tight so less worries about vac lines ever popping off.
__________________
B-Man - FlexFuel Mafia
1991 TSi AWD E85 - BEP S362, DSMLink V2, Built 2.0L Idle Vid 628hp Graph 541hp Vid 10.93@137 Vid
1992 SC300 E85 - BW 84-75, Vlad Infinity, NA-T, 6spd Idle Vid 709hp Graph 709hp Vid 11.1@131 Vid
2006 Bayliner 195 - Carbed 5.0 Top Speed Test
Halon is offline   Reply With Quote
Old 03-17-2016   #8
C3L1CA
N17r0U$ br4D
 
C3L1CA's Avatar
 
Goosehead Racing Champion! Street Drifting Champion!
Tournaments Won: 1

Join Date: Apr 2007
Location: Oakdale, MN
Drives: bikes and a silveraydo
Posts: 2,749
Re: Push Connect Vacuum Lines?

I used 1/4" line on my setup and feel like I might have ended up using the Nycoil fittings.

http://www.nycoil.com/Fittings/PushFtg.html

I could see if I can find the receipt when I get home and double check. My setup is probably way more simple than what you'd need for a car. But I just used a Y fitting like this one
http://www.nycoil.com/Fittings/CompYMaleInch.html
then 2 90 degree elbows
http://www.nycoil.com/Fittings/CompM...ElbowInch.html
Then I got a few feet of line and still have a little bit of extra left over. I couldn't tell ya what brand of line I got but I got more than I thought I needed because I don't remember it being super expensive.

I just went into JHF on my lunch with a drawn out sketch of the shit I wanted and about 15 minutes later he just came back with the stuff I wanted. Guy I talked to was really nice and helpful. Could look at the Nycoil site to get an idea of stuff you'd think you'd need and if you had part number and a sketch I'm sure they'd get you taken care of
__________________
My rice rocket best times
Pump Gas: 8.85 @ 152.3 in 2016
Race Gas: 8.982 @ 152.16 in 2014
C3L1CA is offline   Reply With Quote
Old 03-17-2016   #9
Halon
Pewp Champion
 
Halon's Avatar
 

Join Date: Nov 2003
Location: Blaine
Drives: Teh Bean
Posts: 12,309
Send a message via AIM to Halon
Re: Push Connect Vacuum Lines?

One thing I noticed is that this nylon tube, they refer to it by it's OD. Where as normal vacuum line I believe is typically referred to by it's ID.

So if I have a bunch of 1/4" vacuum line on my car, I'd want like 3/8" nylon push connect lines for that.

So your 1/4" nylon line, is probably more like 1/8" vacuum line?
__________________
B-Man - FlexFuel Mafia
1991 TSi AWD E85 - BEP S362, DSMLink V2, Built 2.0L Idle Vid 628hp Graph 541hp Vid 10.93@137 Vid
1992 SC300 E85 - BW 84-75, Vlad Infinity, NA-T, 6spd Idle Vid 709hp Graph 709hp Vid 11.1@131 Vid
2006 Bayliner 195 - Carbed 5.0 Top Speed Test
Halon is offline   Reply With Quote
Old 03-19-2016   #10
Pushit2.0
15min late to the world
Re: Push Connect Vacuum Lines?

Tube size is by OD and hose size is on ID. I would think with a heat gun you could bend the tube.

~John
__________________
Moon taxi: 9.45@156.9 mph 41psi 2011... Letting people down sense 2012.
Pushit2.0 is offline   Reply With Quote
Old 03-19-2016   #11
turbotalon1g
 
turbotalon1g's Avatar
 

Join Date: Mar 2005
Location: Blaine, MN
Drives: '91 Automagic
Posts: 13,908
Send a message via AIM to turbotalon1g
Re: Push Connect Vacuum Lines?

I'll add here incase you didn't see in the SB, but I should have some laying around you can try.

If it works you can take it in to the store to get the exact size.
__________________
Aaron/brownman/big brown.
'91 Automagic.
'02 Z06
Please leave feedback - http://www.dsmtuners.com/forums/itrader.php?u=58309
turbotalon1g is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:51 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.