Timing belt job on a 3S, any advice?
 

I'm looking to do a T-belt job on a '92 stealth soon, any advice?

Any bolts that get RTV'd?

Thanks

Re: Timing belt job on a 3S, any advice?
 

Advice? Pay Swanny.

Re: Timing belt job on a 3S, any advice?
 

Andre used to have a 3000gt I'm sure as built as his was he did a few timing belt jobs

Re: Timing belt job on a 3S, any advice?
 

Sohc, Dohc, Turbo? They can be intensive, budget a lot of time and then budget some more.

Turbo DOHC tips:
Motor mount comes off in a particular order, otherwise good luck getting it out (driver side front). Also ensure you pull the motor mount and then the lower timing belt cover; otherwise you'll break the cover most likely. Track where the bolts go as they are all different lengths.
Crank pulley is probably separated, ensure it isn't before reassembly
You can put the accessory belt on and tighten the a/c pulley from below the car; makes it easier.
Power steering pump doesn't have to come off if you have the proper tools, but the idler/tension pulley does.
Go slow, have fun, ensure all 4 cam gears align and the motor is at TDC when you install.

Re: Timing belt job on a 3S, any advice?
 

turbo motor sir.

Thanks for the help, not looking forward to it.

Re: Timing belt job on a 3S, any advice?
 

It's not that bad. I have done a lot of them.

Re: Timing belt job on a 3S, any advice?
 

Yeah it really isn't to bad at all; once you get over lining up 4 cams and the crank pulley; and working in a space to where even a monkey would be cramped :)

I've done worse as well. Just take your time Aaron, you'll be fine.

Re: Timing belt job on a 3S, any advice?
 

What do you line the cam gears up to?

Re: Timing belt job on a 3S, any advice?
 

There are marks on the valve covers.

Re: Timing belt job on a 3S, any advice?
 

Not the head like a DSM then?

Re: Timing belt job on a 3S, any advice?
 

http://www.youtube.com/watch?v=Il0uuJXXW_w

Not the best video, but not the worst and the motor mount is explained pretty well

Re: Timing belt job on a 3S, any advice?
 

Thanks. Hopefully I'll be tackling this friday.