Quote:
Originally Posted by dsmolition
Some of what I’m going to be doing in the next few months.
Take my shep trans out and send it to jacks to get it redone again..
Going to powder coat my brembos and re-install with new pads ss brake lines, and rotors that I already have sitting here.
adding a 9 turbo to it also.
Pick up some qtp's for some stock wheels on the dsm.
|
Quote:
Originally Posted by C3L1CA
Any of you guys do any of the winter mods you had planned?
I need to still buy all of mine I had planned
|
So far, I have done more than what I originally thought haha and not done yet.
Got the trans sent out, waiting to hear from shep to see what all needs to be fixed on my stage 4 trans.
Bought a PTT twin disc so I don’t have to send my trans out every winter to get serviced due to my act dragging at high rpm's Also got the Isuzu slave and a coned TOB for good measure.
Got a larger ar housing for the 6262 to make a bit more power. Went from a .58 t4 to a .68 t4
Installed a full ss clutch line.
Shaved and Powder coated my transmission motor mount
Did some weight reduction. Removed rear seat belts/brackets and rear wiper and hatch sprayer.
Installed new oem heater core hoses and shifter linkage bushings.
I powder coated my brembos acandy red with and installed with new pads/rotors/ss lines/ate super blue. (evo)
Started to fab up a flaming river batter cut off through the key hatch hole.
Left to do.
Find some light wheels to use for slicks.
Order some fluids and put the car back together.
Re heat wrap my downpipe.
Install a new spindle with wheel bearing