Winter mods?

[scheides]

Yaaay! i love these threads!

BeaterX gets more maintenance. Check on cam clearances, it's noisier than I remember when its cold and its been burning oil ever since I burnt up that spark plug.

MR 2-piece rotors, gotta get them turned
Testing the new Girodisc S/S orange pads, hopefully they stack up to my beloved ferodos!
Fresh brake fluid
finally found some wheel spacers & extended lugs, gotta find time to install them
New rims?
Other than that, plow snow with my X

Originally Posted by polishmafia

I heart you too.

The only thing I want to do to the Genesis this winter is install some lowering springs on it. Maybe buy some wheels if a deal comes along... Ridin' on dubs bishes!

That kinda sounds like fun! I wouldn't mind helpin!

Originally Posted by s1ngletracker

snow tires

psh that doesn't count! They should be on already :P

Originally Posted by Shane@DBPerformance

Gonna chip it and cam it.

Originally Posted by Shane@DBPerformance

Big bore kit for the scooter - 65mph

You talking about the same thing here? I wanna see 88mph + a flux capacitor on that hog

Originally Posted by bramagedained

For awhile I was debating changing the fuel system some and having it setup for E98, but, decided I should just leave it alone.

Leave it, enjoy it

Originally Posted by Goat Blower

MHI upgrade? Not really a prototype, but probably needs some real world testing and some board love to sell.

Why MHI when we have MAP in our back yard?

[Kracka]

Originally Posted by Goat Blower

MHI upgrade? Not really a prototype, but probably needs some real world testing and some board love to sell.

Nope; but rather MAP's response to said turbo.

[Halon]

Guess I'm not in the whole Evo X turbo loop. But wouldn't one of MAP's existing EFx turbos already be similar to it?

[scheides]

ef2 is smaller and ef3 is a little bigger, so I guess something inbetween.

[Kracka]

Hence the EF2.5

[munchgsx]

scheides you have a catch can on that X? Was it #1 plug?

[Kevin 1G Drummer]

I haven't been around much lately, sounds like I've missed a little. The gf and I are buying a house, so that will be mod #1. Then after we get settled, I'm gonna talk to my uncle about buying his 280z. It has been sitting in a pole barn for probably 20 years, but it's in excellent condition.

[dsmolition]

Some of what I’m going to be doing in the next few months.
Take my shep trans out and send it to jacks to get it redone again..
Going to powder coat my brembos and re-install with new pads ss brake lines, and rotors that I already have sitting here.
adding a 9 turbo to it also.
Pick up some qtp's for some stock wheels on the dsm.

[bramagedained]

Originally Posted by munchgsx

scheides you have a catch can on that X? Was it #1 plug?

Ooh. That is one mod my car could actually use, a real catch can/breather setup, instead of that BS I have rigged up now so it would be "good enough" for Proving Grounds.

[scheides]

Originally Posted by munchgsx

scheides you have a catch can on that X? Was it #1 plug?

No catch can, just vent to atmosphere.

Hrm, can't remember if it was #1 or #4...

[93gtpeater]

Look for a turbo kit for the bike or car. Thats my winter mod for winter. hope winter goes by fast this year.

[C3L1CA]

Any of you guys do any of the winter mods you had planned?


I need to still buy all of mine I had planned

[4seasons69]

Originally Posted by 4seasons69

I have a lot going on this winter

New engine: map stage shortblock with a built head with ferrea components, +1mm valves and ported and polished.

Clutch rebuild kit

Upgraded clutch fork

New turbo (probably a BW billet 67mm s400sx)

Full blown dual pump hanger to get rid of the rusty modified stocker

Fix or replace my wideband

Fix my fuel pressure gauge inside the car

Put some carpet in it to clean up the interior a little

I'm sure there are other little odds and ends I'm forgetting right now too

Originally Posted by C3L1CA

Any of you guys do any of the winter mods you had planned?


I need to still buy all of mine I had planned

I definitely did! I decided not to go with the upgraded clutch fork or the full blown dual pump hanger. I completely rewired my existing sending unit.

My engine and clutch disks are in.

A turbo will be ordered once I get my tax refumd

I have a lead on some carpet and headliner

Will be finishing it up and starting her up on Tuesday with the old turbo

[Goat Blower]

I went and started mine at the storage place yesterday.

[goodhart]

Originally Posted by goodhart

-Pull motor out of talon

-Make project thread

Both done. I set my standards pretty low so I don't disappoint.

[evotuner]

[turbotalon1g]

Originally Posted by C3L1CA

Any of you guys do any of the winter mods you had planned?


I need to still buy all of mine I had planned

I haven't done a damn thing. Hoping to start in the next week or so.

[bramagedained]

My car is at db now. Getting a surge tank fuel lines a pump and retuned for E98.

[dsmolition]

Originally Posted by dsmolition

Some of what I’m going to be doing in the next few months.

Take my shep trans out and send it to jacks to get it redone again..

Going to powder coat my brembos and re-install with new pads ss brake lines, and rotors that I already have sitting here.

adding a 9 turbo to it also.

Pick up some qtp's for some stock wheels on the dsm.

Originally Posted by C3L1CA

Any of you guys do any of the winter mods you had planned?


I need to still buy all of mine I had planned

So far, I have done more than what I originally thought haha and not done yet.

Got the trans sent out, waiting to hear from shep to see what all needs to be fixed on my stage 4 trans.

Bought a PTT twin disc so I don’t have to send my trans out every winter to get serviced due to my act dragging at high rpm's Also got the Isuzu slave and a coned TOB for good measure.

Got a larger ar housing for the 6262 to make a bit more power. Went from a .58 t4 to a .68 t4

Installed a full ss clutch line.

Shaved and Powder coated my transmission motor mount

Did some weight reduction. Removed rear seat belts/brackets and rear wiper and hatch sprayer.

Installed new oem heater core hoses and shifter linkage bushings.

I powder coated my brembos acandy red with and installed with new pads/rotors/ss lines/ate super blue. (evo)

Started to fab up a flaming river batter cut off through the key hatch hole.

Left to do.
Find some light wheels to use for slicks.
Order some fluids and put the car back together.
Re heat wrap my downpipe.
Install a new spindle with wheel bearing

[Murlo26]

I've bought some of mine, but its too damn cold to work on it right now haha.

I need to pull off my 1300cc injectors as I sold them last week. Time to man up and go 2000cc injectors I guess. Not looking forward to dialing them in on stock ECU but on e85 it should be doable.