Trouble getting axle out (Pics)

[rst95eclipse]

Everyone has told me to do that. My prybar and pickle fork won't do the trick. On the drivers side axle, I tapped on the bearing like it said (rubber mallet, hard plastic mallet, 16 ou framing hammer, 20 ou ball peen, then a 5lb short sledge), same issue. After I unbolted the housing, it just slid right out like it had KY all over. I'm just finding it easier to just unbolt the housing and take it with the axle. The only thing I can forsee working is using a closed wrench underneath.