Project S14 240sx

[Kevin 1G Drummer]

As I've said before, if anything gets swapped into the car it's gonna be an RB25. And on the wiring, I'm gonna pull it all up and pull all the covering off so I can see exactly what I'm working with. There's a guy in Milwaukee parting out one right now, so I'm gonna see about maybe getting his engine harness.

Today we got the front suspension raised up a little more than an inch, so it's not slammed to the ground anymore. Also took off the stock clutch fan since they are pretty much useless. The AC fan is wired to a switch in the interior, but I'm gonna be changing that so it comes on with the key. Also, the rear tires are absolutely bald on the inner sides, the right rear is down to the steel belts. So I hope it warms up soon so I can throw on my DSM summer wheels.

Yesterday I was researching tuning options and came across a guy in Australia running a KA-T with the same turbo I'll be putting on it (GT3076R) and and at 22psi he made something like 413whp on 110 octane, so I'm hoping I should get close to that with E85. His engine was completely stock aside from forged pistons and head studs.