New product devolopment - Page 4

**mx3twinturbo** · 08-12-2010

haha, i don't know why i get you to confused lol,
hows it fit sir?
also if possible when you get everything all situated could i shoot a few photos of it installed?

Swifty1638 · 08-12-2010

Woot for new product developments!

**Murlo26** · 08-12-2010

Not only our names, but our cars as well. I guess the fact we both have red Evo X's doesn't help.

My car isn't running yet, but should be soon, they are putting the motor back in now.

You are welcome to shoot some pics when installed if you want, not sure when Mike plans on tuning his new intake, hopefully mine will be in a week or two, but who knows.

**mx3twinturbo** · 08-12-2010

Quote:

Originally Posted by Murlo26

Not only our names, but our cars as well. I guess the fact we both have red Evo X's doesn't help.

My car isn't running yet, but should be soon, they are putting the motor back in now.

You are welcome to shoot some pics when installed if you want, not sure when Mike plans on tuning his new intake, hopefully mine will be in a week or two, but who knows.

so true, i think one of you needs to paint there car :-) lol
thanks man keep in touch!

**Halon** · 08-12-2010

Very clean looking product!

**scheides** · 08-12-2010

Looks fantastic! Do you think the ends should have a bead rolled into them though? Some cone filters are oiled, and they could slip off of the end.

I kinda want one, even though I don't need it :P

Swifty1638 · 08-12-2010

I dont see beads really needing to be needed on an intake pipe..remember, this isn't the charge side

All it does is guide filtered air into the turbo for it to do it's work. No pressure..

**scheides** · 08-12-2010

Right, but if there's nothing actually supporting it besides the couplers, there will be tension on it; violent, violent tension from the car making the massive whp that these intakes will support!

I'd want one if it was going on my car, that's all I'm saying

**goodhart** · 08-12-2010

Quote:

Originally Posted by scheides

Right, but if there's nothing actually supporting it besides the couplers, there will be tension on it; violent, violent tension from the car making the massive whp that these intakes will support!

I'd want one if it was going on my car, that's all I'm saying

Nice recovery.

Swifty1638 · 08-12-2010

Fair enough.

Another thing I learned is that that wrinkle powdercoating actually makes removing filters and couplers that have been tight for a while really REALLY hard to come off! I'd assume that if there's a need for any bracing in the future, they'd get it done, once they have a car there to finalize mock up on.

turbotalon1g · 08-12-2010

Nice piece.

So did you guys give up on the 1G DSM radiator brackets, I actually have a couple of complete mint sets.

The main part would be using something other than shitty rubber for the mounts. I would think just using either the front or rear bolt hole instead of both would make for a cleaner look.

blageo23 · 08-12-2010

MAYBE you should bring a set by like you have been saying for 3 years

. JK man. If you bring by a set we will look into them.

Also Dave and Mike, one of you need to change you user name also! I was sitting here getting you guys confused the whole time. Lol.

And if there is a need for a bead roll we can easily do that as well.

**mlomker** · 08-12-2010

Quote:

Originally Posted by blageo23

Also Dave and Mike, one of you need to change you user name also! I was sitting here getting you guys confused the whole time. Lol.

(M)ichael Lomker....mlomker. Come on now.

It was also my idea to have you guys do this for us and I get my intake after Dave. He was more of a pita. That's how that works.

blageo23 · 08-12-2010

Haha they are just too close looking. lol. It wasnt that he was more of a PITA is was that we just like him better. LOL jk! We will make yours better, how does that sound

**Kracka** · 08-12-2010

+1 on bead rolling the ends and BOV tube. A little extra security never hurts. I've seen filters slip off plenty of intake kits after prolonged engine vibrations.

blageo23 · 08-12-2010

Thanks for the ideas guys. Id like to get some more feedback from others on this.
http://mitsustyle.com/forums/showthread.php?t=27557

turbotalon1g · 08-12-2010

Quote:

Originally Posted by blageo23

MAYBE you should bring a set by like you have been saying for 3 years

. JK man. If you bring by a set we will look into them.

lol, I'm not going to be the one making $$$/advertising off this.

I'll try to remember, I don't leave the house too much these days.

I'll put it on my list of stuff to do.

**mx3twinturbo** · 08-12-2010

Quote:

Originally Posted by turbotalon1g

lol, I'm not going to be the one making $$$/advertising off this.

I'll try to remember, I don't leave the house too much these days.

I'll put it on my list of stuff to do.

haha,
If were out in your area ill shoot ya a pm if that works?

Swifty1638 · 08-12-2010

You talking about billet replacements for the stock radiator brackets? I can always try to get em mine..

turbotalon1g · 08-12-2010

For the longest time I didn't know where they were. Turns out I'm like 5 mins away at least once a week because Sam's aunt lives right off 88 and 35w.

Anywho. That works Jesse, that conquest is still sitting btw.