Ticking from 700 to 3k RPM

[TheBlizzard]

Yes 3rd generation lifters, not from a 3rd generation Eclipse. There have been many revision of lifters over the years I think. The latest part number I could find for 3rd generation lifters was MD377054. If you get them don't be alarmed, but they will be a bit taller than your stock ones most likely but they will work just fine.

You can clean them but you are just delaying the inevitable, since the overall design of the lifter is flawed. The new still ones have a larger oiling hole as well as a few other characteristics.

Good luck.