|
Re: A little help
checked all fuses, and relays. All fuses work perfect. I took out the A/F gauge and reset the ecu though it still runs in safe mode. The car is seeing 3hz on my safc2 [like it does when the car is off] but when its running. So this leads me to think its the MAS. Also the TPS is reading 100% which is why it kills, [running pig rich]. I checked resistance like the chiltons told me to and it reads connections 1 and 4 @ ~.76 ohms and when I check 2 and 4 and open the throttle it doesnt read at all. So I dont know if the ECM fried and is just not reading the TPS right or if the MAS and TPS were taken out when the wires contacted. Any other suggestions. I am willing to pay for a 2g stock mas if anybody knows of one around for reasonable.
|
Threaded Mode