|
Re: is 5 deg BTDC ok?
You should be able to do everything but the valve guides. It is pretty easy to do. The head and cams will have to come off and you will need a spring compressor. If you have access to a welder you can make your own compressor that works well.
Basically compress the retainer on the top of the spring downwards and remove the keeper (2 little pieces). The slowly release the tensioner and take the retainer and spring off. There will be a washer under the spring that you need to keep track of too. The valve will fall out now and it is ready to head to the machine shop once all 16 are done.
__________________
Is burning corn and stayin' warm!
My motorcycle is stock and reliable, my Talon is neither!
|
Threaded Mode