3.5" v-band

[Swifty1638]

I have a brand new 3.5" PTE v-band flange, for your exhaust. Asking $45, since it's new, not used, and I don't want to loose too much cost on it.

-A. Swift

[Swifty1638]

sweet.

still for sale.

-A. Swift

[EclipseGST]

Is the flange 3.5" or is the pipe/ID 3.5"?

Question is, will it fit a compressor outlet of a GT42? The flange size needs to be 4.xx"... I believe its 4.25" but they call it a 3.5" V-Band... Cant remember.

[Pushit2.0]

The GT42 compressor cover would use a 3" vband(3"ID) and the exhaust side with the PTE 1.01A/R housing is a 4" Vband(4"ID). You would be better off welding on a 3" straight pipe to have a coupler off the comp housing or machine it for an O-ring of some kind.

~John

[EclipseGST]

The flange on my Compressor housing is 4.xx" and the ID is 3.5". I have 3" V-band farrells and they are too small by a ways. I'll measure it later.

[Goat Blower]

Are the ferrules SS or mild?

[Swifty1638]

All I know is it's a machined 3.5" vband. Looks quite nice.

-A. Swift

[Swifty1638]

bump

[Goat Blower]

Put a magnet on it. I'm interested if it's SS.

[Swifty1638]

text my cell tomorrow. I'll see if I can find it in the pit of my car tomorrow at test it for ya steve.

-A. Swift

[Swifty1638]

It's not with the clamp (Not sure where that is) but it IS a fully machined flange. Looks quite nice, actually. It's aluminum.

-A. Swift

[Goat Blower]

Aluminum?

[Swifty1638]

I'm a dumbass. It seems to be heavy for aluminum. It's GOTTA be SS

-A. Swift

[Swifty1638]

Steve?

-A. Swift

[Swifty1638]

Still for sale.

-A. Swift

[Swifty1638]

Bump!

-A. Swift

[Goat Blower]

Sorry, I'm out. I'm going smaller, not bigger.

[Swifty1638]

bump

-A. Swift