Which cams?

[95talonracer]

I am running this combo. Crower 414's and supertech dual titanium valvesprings and retainers.

Springs and retainers

Valve Spring Specifications:
- Outer Spring O.D.: 28.10mm
- Outer Spring I.D.: 20.00mm
- Inner Spring O.D. 20.00mm
- Inner Spring I.D.: 15.20mm
- Seat Pressure: 92 @ 39.6
- Open (lift) Pressure: 247 @ 11.5
- Max Lift: 14.90mm
- Coil Bind: 24.70mm
- Rate: 12.50 lbs/mm

Cams

64414-2 Stage 3 - 3/4 Race

Recommended for strip and some street.
Lope at idle.
Requires #84175 (Upgraded springs but I bought the above in replacement of these)
RPM Range: 1100 to 8250+
280 / 280 196 Lobe 198

213 Valve 215 .411" inch .391"

10.44 mm 9.93

[Pushit2.0]

Originally Posted by 95talonracer

... Crower 414's and supertech dual titanium valvesprings and retainers...

Your springs are not titanium, just the retainer. Also you have way to much spring for the crower 414s.

~John

[95talonracer]

Originally Posted by Pushit2.0

Your springs are not titanium, just the retainer. Also you have way to much spring for the crower 414s.

~John

Ya that is what I ment. Well it is better to have too much then not enough since ill probably upgrade here soon. What is the hurt to have too much spring?