Dave's Evo X Build/The Life of Dave blog

[Murlo26]

Originally Posted by scheides

this. take off a wheel and take a look, it's pretty obvious which bolts, there's two big ones. 17mm IIRC, mayyybe 19 (on the CT9A anyways). If you absolutely can't figure it out, give me a call and stop over. We can do it in about 20 mins. 651.236.0985

Hmmm, well maybe I will stop by sometime, you free tomorrow or Thursday?

I really do need to get my own tools, or start gathering some. A torque wrench is very necessary.

Would this http://www.sears.com/shc/s/p_10153_1...orque+Wrenches and a set of bigger metric 3/4" sockets be all i would need to do this job?

Perhaps I can watch the first time, then next time I can do it myself, or have you guide me the first time.

[t-revzr]

Originally Posted by Murlo26

Hmmm, well maybe I will stop by sometime, you free tomorrow or Thursday?

I really do need to get my own tools, or start gathering some. A torque wrench is very necessary.

Would this http://www.sears.com/shc/s/p_10153_1...orque+Wrenches and a set of bigger metric 3/4" sockets be all i would need to do this job?

Perhaps I can watch the first time, then next time I can do it myself, or have you guide me the first time.

You never watched me when I was doin them at Scheides the other weekend? It's a walk in the park!

[Kracka]

Originally Posted by Murlo26

Would this http://www.sears.com/shc/s/p_10153_1...orque+Wrenches and a set of bigger metric 3/4" sockets be all i would need to do this job?

Thats too small, that torque wrench is 3/8" and in in/lbs, you'll want a 1/2" drive in ft/lbs for doing suspension and wheels.
This is the one I have: http://www.sears.com/shc/s/p_10153_1...orque+Wrenches
As a note, Craftsman doesn't have a lifetime warranty on their tq wrenches but I've had mine since 2002 and it still works perfectly.