|
Re: Proj. Talon MR
I got all the suspension back together on drivers side. Now it's off to the frame shop to get straightened. Oddly enough I test fit the new fender that I picked up onto the frame rail and it still lines up for the most part. I could actually bolt it to the chassis b/c of how large the mounting holes are on the fender.
So far I replaced the broken knuckle with a used one that I rebuilt completely, rebuilt axle halfshaft from Napa, new k-sport coilover that took way too long to receive (a little over a month to get - ridiculous!) . When other one of these k-sports go I'm not getting another because the cost and the wait, (not to mention their performance) isn't worth it. Probably just go with some lowering springs.
Now I have to track down another ADR GT-Sport 18" rim, they are older than sh*t, and noone has them anymore. I'd rather have a complete set that I could use than have 3 that I can't. Doesn't really matter though, as I have a set of Evo MR rims that will go on.
|
Threaded Mode