MitsuStyle MitsuStyle

Go Back   MitsuStyle > The Homefront! > Project Talk

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-10-2010   #11
DoughtCom
It's deluxe son... deluxe
 
DoughtCom's Avatar
 

Join Date: Feb 2004
Location: Texan...
Drives: Your mom
Posts: 1,234
Send a message via AIM to DoughtCom
Re: Project GC8 AKA USDM STi Killer

Been a while since I've posted (again). I'll be posting a lot of pics. But the good news is after about 30 hours or so of fixing broken wires on my wiring harness I acquired and mating it to the chassis. It turns over, has a working stereo, primes the fuel pump, has working door locks and windows, has working turn signals/brake lights/etc. The STi HVAC controls even work! Hell even the clock on the dash works, even though that's getting replaced with an ATi gauge pod.

At any rate, after a very rough week of digging through 2 wiring diagrams it seems to have paid off. The wiring harness was soldered, heat shrinked, zip tied and then electrical taped on every wire I swapped/spliced. So it should be good for a long time

Anyway off to bed, tomorrow morning I'll get some gas in the tank to see if actually runs. If it does... expect to see it on the cruise as promised... game Blouses.

Also wanted to thank Spaz for his help, one of the few people that have made it out to lend a hand and he's been quite a bit of help. Thanks man!
__________________
2010 Evo X GSR
1997 Subaru GC8 STi

sleepydsm: "Shit breaks, $2500 trannys are disposable. If that upsets your stomach, get out now."
DoughtCom is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 09:40 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.