Quote:
Originally Posted by twack
no i mean the front mount that bolts to the block to the front cross member
|
From the pics I confirm a 2g head and tranny. based on the front mount not being on the cross member I think its a 7bolt block, the owner would have to look at the front of the block twards the tranny bell housing, and let us know if there is a 10mm hole in the bell housing but the block does not fallow the bell housing. If its a 6bolt block, which I doubt, you could bolt the proper front motor mount onto the block and have it go to the front cross member. If it is a 7 bolt motor I would also wonder if there is a rear motor mount, and if so how is it held in place.
~John
Threaded Mode