Dave's Evo X Build/The Life of Dave blog

[turbotalon1g]

I don't know if you will get "full boost" by 4000, I know the EF2 would, but also depends on boost and such. Good luck. Let me know how the tunage goes.

[Murlo26]

Originally Posted by turbotalon1g

I don't know if you will get "full boost" by 4000, I know the EF2 would, but also depends on boost and such. Good luck. Let me know how the tunage goes.

remember this is a 10 not an 8/9.

My black hit 36-37psi by 4200rpms on DB's dyno last time on my 2.0L.

With an extra 10% displacement it should be another 400rpms or so lower on the EF4 I would think.

The EF4 is a bit bigger so it could be more like 4200-4400rpms but I wouldn't think over 4500rpms on the setup, we will see. I am also not boosting high 30's this time, so that is another factor.

[Kracka]

Originally Posted by turbotalon1g

I don't know if you will get "full boost" by 4000, I know the EF2 would, but also depends on boost and such.

Andrew is getting full boost from his EF3 with a 2.3L faster than a 2.0L spools a Green.