my new project

[Halon]

Are you going divided? There have been tests done on the divided housings showing that the "smaller" .91 housing made just as much power as the one 1 size larger, yet improved the spool. That is why I got the .91. Then once I realised the housings are massive, and the number is a little deceiving, I understood why. I think there is a divided one in the .8x size range, I've been contemplating switching to that.

Lots of really good info here:
http://www.supraforums.com/forum/sho...-S300SX-turbos

[4seasons69]

I'll have to check my exhaust manifold and see if that is divided or undivided. but will probably go with a divided either way lol

[4seasons69]

Well I got a little work done today.

[4seasons69]

Some more pics

[4seasons69]

Well I got the long block assembled and ready to have the cams degreed. Now I just need the cams degreed, clutch rebuild kit and an upgraded clutch fork and the engine can go back in finally.

Also when I was going through my parts I found my oil pick up tube but map had already put on my oil pan. I figured map probably installed a new one but for my own peace of mind I pulled the oil pan and of course they did but I snapped a picture of the main girdle