beaterX project thread

**LingLing** · 05-13-2013

Quote:

Originally Posted by goodhart

Do any locals have their injectors done at Ravenworks in Maple Grove?

I'll be sending my 2000's to get flow tested and cleaned there. I believe they said it's $22 per injector, but includes new o-rings and before/after comparison.

Damn that timing job looks easy! Maybe I've been looking at Subaru motors too long but your longblock looks REALLY tall in this picture. Are the 4B11's any taller than an Evo 4G63?

**scheides** · 05-13-2013

Quote:

Originally Posted by LingLing

Damn that timing job looks easy! Maybe I've been looking at Subaru motors too long but your longblock looks REALLY tall in this picture. Are the 4B11's any taller than an Evo 4G63?

I don't think its really any taller, the head almost seems thinner but with no lifters or rockers I imagine it is at least slightly smaller. The longblock probably looks taller for two reasons...first because of the oil pump; it bolts to the bottom of the shortblock and into the oil pan, you can see it in this pic (the lower chain). Secondly there is a whole cover that wraps around the bottom covering the crank caps, crank and rods as they spin down, almost helping prevent windage from the oil in the pan...I don't think there is a piece like this on a 4G63.