Roll Cages

niterydr · 07-28-2005

Well got the bender all setup today as we are waiting for parts for projects. Works awesome, we made a 1g main hoop. Added 1" on the bottom on each side so the hoop can be tilted to suit the driver.
This is out of 1-3/4" .134 thickness DOM mild steel (NHRA, NDRA approved)
Again, the bottom needs to be trimmed to fit the plates, but we figure we'll offer these for the local guys/anyone else that wants one done up. Weight 24lbs. We are sourcing pipe with .125" thickness to shave a few ounces/pounds.
$100.00 + S&H, Mild steel
4130 Chrome moly-TBA

We are out of stock for materials, but have the 3s one figured out, just need to get our mild steel and chrome moly here to bend some up. We can supply straight tubing (aka the rest of the 'kit') for you guys to buy from us and even notch it for you if need be. Otherwise by end of next week we should have a complete kit figured out.
Pictures here

dsm10sec · 07-28-2005

Interested to hear what the prices will be for the "kit". Keep us posted.

niterydr · 07-28-2005

Should be around the same price as most other kits, $200 or so.
The main hoop is the hard and expensive part, the only problem with a 'kit' is some of the pipes, well most, still need to be cut to the drivers specifications.
We can supply you with straight pipes, and offer a notching service...

DSMPARTSGURU · 07-29-2005

hey josh? do you install???

cc

Pushit2.0 · 07-29-2005

We should have our roll cage pricing up on the site here, and that is installed on a gutted car.
Mild steel roll cages are $100 a point.*
Chromoly roll cages are $150 a point.*

~John

**Goat Blower** · 07-29-2005

Chris needs one in his new "toy".

97GSXAWD · 07-31-2005

What do you have for a price on a 10 point chromoly kit for a 2G? Or, do you not have something like this as of yet. Thanks

Pushit2.0 · 08-01-2005

Would you want it welded in also? Ither stop by the shop or call and we can talk about it.

~John

DSMPARTSGURU · 08-01-2005

Quote:

Originally Posted by Goat Blower

Chris needs one in his new "toy".

shsss.... steve... lol

97GSXAWD · 08-01-2005

I was more or less hoping for just the bent tubes (mian hoop, etc.) and the piping to make the cage. Having the cage welded by you could also be a possibility but I havn't decided what exactly I want to do yet. I think my best bet would be to swing by the shop and try to figure this out. Could I get your hours as I can't find them in any of the threads. Thanks a lot for your help.

Pushit2.0 · 08-02-2005

If you want a chrome moly roll cage it will need to be all certified TIG welds, and stress releived, unless you know what you are doing. But we will add our hours of operation to our post and make it a sticky. If you want to stop by just about anytime between 10am and 6pm will work or call to see how late we are going to be there that day. Thank you.

~John