1991 Eagle Talon TSi Performance Partout

[Chim55117]

Stainless Steel VRSpeed Factory J-pipe - $40
http://i749.photobucket.com/albums/x...aphy/005-1.jpg


EXHAUST
2G O2 housing, professionally port matched to an EVO 3 16G hotside. -$40

http://i749.photobucket.com/albums/x...Partout039.jpg


EVO 3 exhaust manifold, no cracks, hole tapped for EGT. - $60

http://i749.photobucket.com/albums/x...hy/photo-3.jpg

http://i749.photobucket.com/albums/x...y/photo1-2.jpg


EVO 3 16G, needs a rebuild. - $160

http://i749.photobucket.com/albums/x...aphy/002-1.jpg

http://i749.photobucket.com/albums/x...aphy/003-1.jpg

http://i749.photobucket.com/albums/x...aphy/004-1.jpg


COOLING
Setrab oil cooler with AN lines and fittings for 1G 90 housing will bolt right on to a 1G. - $150
http://i749.photobucket.com/albums/x...graphy/027.jpg

http://i749.photobucket.com/albums/x...graphy/022.jpg


ELECTRONICS
1x 1G EPROM ECU - $130
http://i749.photobucket.com/albums/x...aphy/016-1.jpg


Autometer Narrowband - $10
http://i749.photobucket.com/albums/x...aphy/010-1.jpg


Autometer EGT, no EGT or bung - $5
http://i749.photobucket.com/albums/x...aphy/009-1.jpg


Greddy Profec B (blue/clear housing) - $100


Greddy 60MM EGT - $30


Stewart Warner 0-40PSI boost gauge 60MM - $30


DRIVETRAIN
ACT 2600 w/6 puck disk, 4K miles on the disk, was in great running condition - $100

http://i749.photobucket.com/albums/x...aphy/023-1.jpg

http://i749.photobucket.com/albums/x...aphy/024-1.jpg


1G Driver's side mount with poly mount - $30

http://i749.photobucket.com/albums/x...aphy/019-1.jpg


1G poly tranny mount - $30

KYB AGX Adjustable Struts on Eibach Springs - $200
(two of the lower mounts on the rear struts came out rough, may need to be replaced, other than that they are in good working condition. The coating on the springs is coming off a bit. This is outrageously cheap, haha)



INTERIOR TRIM
1G pillar with gauge 3 gauge pod - $20

http://i749.photobucket.com/albums/x...aphy/018-1.jpg


FUEL

Denso 550CC injectors - $80





Items I'm willing to take as trades are decent 2G AWD suspension, AEM fuel rail, or 2G/EVO ECU flash cable.

Give me a text at 612.381.6195 for details. Include your forum name/actual name. I have a few ads up on other forums so this really helps me out.

Thanks for looking.

[KcGsXrated]

might grab one of the eproms if the other one falls through, ill keep you posted

[dragonov_elite]

Do the FP couplers come with the fp intake pipe?

[streetTERROR]

Interested in HKS cams, Greddy egt, and -8 feed lines.
Can I get pictures of all and a little more info on cams and does the gauge come with a sending unit and bung?

[Kranz]

How many miles on the 6 bolt.

[Chim55117]

Originally Posted by Kranz

How many miles on the 6 bolt.

Six bolt has been sold as of today. Thanks for the interest.

Removed some items, if it's not there, it's been sold.

Bump.

[Kranz]

Thanks but if the engine comes back up for sale pm me

[93tsi]

Let me know if you decide to sell the radiator without the fans

[Chim55117]

More items sold, thread cleaned. PM's replied.

[Chim55117]

PM's replied, thread cleaned. Did a little digging and found out the fuel lines are to an Aeromotive fuel filter.

[Chim55117]

Bump. ALL prizes lowered.

[ManiacMotorsports]

interested in trim pieces above doors, e-brake cables, and possibly the interior door panels (if they are power doors)

[gohan2058]

I'll take the heat shield for 35 if it's still available! PM me.

[Chim55117]

Originally Posted by gohan2058

I'll take the heat shield for 35 if it's still available! PM me.

PM sent.

[Chim55117]

Bump. Listings cleaned up, PM's replied.

[Chim55117]

Bump.

[Chim55117]

Sold a bunch of parts, updated prices.

[Chim55117]

Bump.

[Chim55117]

Bump. Make some offers guys! No reasonable offer ignored! Leaving in two weeks!

[OMFGeofffff]

I know I texted you about the jpipe a little while ago but see its still up there. You sold it right?