MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Tuning/Electrical

Reply
 
Thread Tools Display Modes
Old 10-17-2006   #1
tjg
 

Join Date: Sep 2006
Location: Mankato,MN
Posts: 108
New problem!

Ok i was on my way to lunch at school today and i guned it in second gear and i started slowing down to the stop sign car was dead. Poped the hood ignition fuse is blown, replaced it quick started it up blew out again does anybody know why this is happing a wiring diagram would be helpful.
tjg is offline   Reply With Quote
Old 10-17-2006   #2
tjg
 

Join Date: Sep 2006
Location: Mankato,MN
Posts: 108
Re: New problem!

I'm gona check the grounds and battery connections first see if works, i'm sick of paying 2.77$ for those 30 amp fuses.
tjg is offline   Reply With Quote
Old 10-18-2006   #3
tjg
 

Join Date: Sep 2006
Location: Mankato,MN
Posts: 108
Re: New problem!

I charged the battery clean the connections i found out that my broken speedo sensor slid between the halfshaft and the tranny and striped the wires wich i thought was the problem but i cut the wires taped them up and it still blows fuses. I put a fuse in start the car, runs for 2 seconds blows a fuse. Idk where to start for tracing wires do you think it could of gone farther up the wires or some place else.
tjg is offline   Reply With Quote
Old 10-19-2006   #4
tjg
 

Join Date: Sep 2006
Location: Mankato,MN
Posts: 108
Re: New problem!

Well i fixed the problem, I feel like a idiot. I traced the wires further into the harness and found the break in the connection, so you can go ahead and delete this thread.
tjg is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:43 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.