Any Ideas on how to plug this properly.

[ESchwanz]

Any Ideas on how to plug this properly.



The plug Chris put in to this oil port is leaking badly!! is there an OEM one or does any one have a better quick fix? Thanks!

[Kracka]

Don't 2G's come stock with the correct plug?

[Halon]

I just have a bolt in there with a crush washer. WHy the heck are there so many washers under there?

You could probably try adding a little RTV or liquid teflon, might help it seal better.

[ESchwanz]

Originally Posted by Halon

I just have a bolt in there with a crush washer. WHy the heck are there so many washers under there?

You could probably try adding a little RTV or liquid teflon, might help it seal better.

Dunno have to ask Chris...

[x-pride]

If the bolt is to long cut it down to the right length and use a crush copper washer. That is how I plug mine. If you don't want to cut it down get the bolt from 90 to 94 NA 2.0 engine.

[Goat Blower]

And make sure your bolt has the right thread, that one is suspect.

[ESchwanz]

Originally Posted by Goat Blower

And make sure your bolt has the right thread, that one is suspect.

What is the correct thread & size???

[95talonracer]

WTF?? Find out the correct thread size and pitch and get a flush allen set screw with some sealant/lock tight and you are good and it looks good too!!

[Halon]

I might have a spare one I could let you have. Just some hex head bolt that looks a lot like what you have in there, but cut shorter so it fits without stacking 6 washers on it.

[munchgsx]

Either a set screw or do like the NA's have. I think is a 12mmx1.25 but not to long.

[AwdGSX13]

it probably wouldnt leak if their wasnt so many damn washers on their.

[turbotalon1g]

That is sick, save that pic.

I have a shortened bolt, with crush washers on it.

[4g63tcrazy]

2g heads have the bolt you'd need if you wanted to go that route.

[lucasoil4u]

yikes i love how the washers dont line up at all!

[GREASEMONKEY]

Just get the plug / bolt out of a NA 4G63 Head. Problem solved.