Car won't start
So I just got done rebuilding my motor. Everything was installed correctly, according to me and a few other people. Anyways, we got the car running and I went to start it up the next morning and it wouldn't start. I changed plugs, wires and made sure everything was plugged in securely. I also checked Link and made sure the Idle Switch was checked. I just checked my cam timing and it was off a couple teeth, went to start it again and it won't even start with any amount of throttle. I can smell gas through the intake filter off the turbo and there is fuel and spark going into the motor. Anyone have any guesses as to why it won't start and why there's gas coming out of the intake?
As for my setup, it's a 2.0 with Wiseco pistons and Manley rods, new Clevite bearings, BS elim., DSMLink, 3" GM MAF, FIC750s, rewired pump, and a ported head.
If anyone cares to come look at the car it's in St. Anthony.
Last edited by JiggahMan; 08-03-2006 at 05:23 PM..
|