boost tap

[driftn1g]

i tapped mine to the fuel pressure thing mounted on the firewall (driver side) is this going to be as accurate as other tapping places??

[Kracka]

Yes, just make sure you tapped into the line running from the manifold to the solenoid, not the solenoid to the FPR.

[driftn1g]

i replaced the one way plastic fitting thats all ready on there, with a T, then connected my boost gauge

[driftn1g]

ok i figured it out

[TheBlizzard]

The FPR spot isn't the most accurate; however its the most common because its easily accesible and an easy place to tap into. I think the intake manifold would be most accurate.

[driftn1g]

vfaq told me the FPR is best..

[Kracka]

The line running to the FPR solenoid comes directly off the intake manifold, make sure you tap before the solenoid as I previously mentioned though.

[tpunx99GSX]

My magnus SMIM has an extra line just for the boost guage. WOOT.