Where Can I Find Tb Shaft Seals?!?!?!

[sleepydsm]

I have looked all over, I called Napa, I called O reilys. I'm looking for CR Chicago Rawhide which i just found out is now part of SKF, so anyone know where I can get these seals? I had a set from a long time ago, and sold them to a friend!

[Spyderturbo007]

Is this what you're looking for?

[turbotalon1g]

3930 is the number i believe, napa had them.

[Halon]

I got mine from Spring Lake Park Napa. Just gave them the CR part number and they were able to get them.

Otherwise I've also gotten them from here...
http://www.ebatmus.com/cart.epl?Buy=...580&Query=3930

[CarPsyco84]

you ever heard of a dealership?

[sleepydsm]

Originally Posted by CarPsyco84

you ever heard of a dealership?

Yeah, if I want to buy the whole throttle body....

[sleepydsm]

I called a napa my work goes through, and said they couldnt get them. Maybe they are retarded, I'll try MY local napa.

[CarPsyco84]

the dealership wants to sell the whole throttle body?

[User Name]

http://www.streettunedmotorsports.co...dsm_engine.htm

About 3/4 way down.

[Halon]

Did you try that link I gave you? It's damn near the same price that Napa sold them to me for. It'll be hard to find much of a better deal on them.

[sleepydsm]

Ok so all napas and normal parts places cannot find or do not carry or cannot get this SKF (CR) Brand seal, #3930. I found a bearing/industrial supply place in Roseville that can get some in 2-3 days, I'm gonna get an extra set as well, maybe 3 sets depending on price.

[sleepydsm]

I did just look at those links, $3.xx each is cheap!

[sleepydsm]

I just ordered six seals from a local place, I had them next day aired I will be selling at least one set.

[CarPsyco84]

too bad 90's have to be special... id probly take a set.

[sleepydsm]

I have 2 sets of 3930 seals for sale. PM if interested.

[twack]

do it the ghetto way and carve out the old ones and put o rings in them.

[sleepydsm]

Originally Posted by twack

do it the ghetto way and carve out the old ones and put o rings in them.

F that. I'm not ghetto, and nothing on my car is either.

My old seals were f-ed for sure. Very brittle. I hot tanked and painted my throttle body, I JB welded the FIAV passage on the backside of the TB and installed the new seals obviously. I also swapped over return springs from a 2G throttle body because they had a lot more "snap" to them compared to my 1G spings. Threw it on this morning with new gaskets from mitsu. Throttle response is better, idles better, and still have fuel cut. (ghey, I did all this because I had a bad boost leak at the TB shaft).

[twack]

look on vfaq its not that ghetto.....well ghetto enough that i did it right

[sleepydsm]

Originally Posted by twack

look on vfaq its not that ghetto.....well ghetto enough that i did it right

haha