MitsuStyle MitsuStyle

Go Back   MitsuStyle > Tech > Tuning/Electrical

Reply
 
Thread Tools Display Modes
Old 07-13-2009   #1
mukapahnpy
Broken'In'Fail
 
mukapahnpy's Avatar
 

Join Date: May 2004
Location: Da Ghetto
Drives: 99 GSX
Posts: 159
Fuel Pump Woes

Can the fuel pump be broken if you can still hear it? I can hear the Walbro whine, but I don't get any fuel. I replaced the fuel rail, fixed a leak, cleaned up the spill but now there's no fuel. Any thoughts?
__________________
Avatar = Small Turbo:confused:
mukapahnpy is offline   Reply With Quote
Old 07-13-2009   #2
1QUICK4
Crash Course Racing
 
1QUICK4's Avatar
 

Join Date: Oct 2003
Location: Skid Row
Drives: in circles
Posts: 2,623
Send a message via Yahoo to 1QUICK4
Re: Fuel Pump Woes

Clogged fuel filter?

Why did you replace the rail?
1QUICK4 is offline   Reply With Quote
Old 07-14-2009   #3
mukapahnpy
Broken'In'Fail
 
mukapahnpy's Avatar
 

Join Date: May 2004
Location: Da Ghetto
Drives: 99 GSX
Posts: 159
Re: Fuel Pump Woes

Fuelab fuel filter, was new when installed. I upgraded the fuel system. Anywho, upon performing the fuel pump check with the female connecter by the firewall, there was a leak at the end of the rail. Retightened it and tried to run the pump again, i.e. to adj. base pressure. Now there's no fuel at all. Any thoughts?
__________________
Avatar = Small Turbo:confused:
mukapahnpy is offline   Reply With Quote
Old 07-14-2009   #4
1QUICK4
Crash Course Racing
 
1QUICK4's Avatar
 

Join Date: Oct 2003
Location: Skid Row
Drives: in circles
Posts: 2,623
Send a message via Yahoo to 1QUICK4
Re: Fuel Pump Woes

Disconnect the fuel line at the pump cover and jump 12v right to the connector at the pump. If fuel comes out move up the line and disconnect the line at the fuelfilter inlet, check again, etc, etc
1QUICK4 is offline   Reply With Quote
Old 07-15-2009   #5
mukapahnpy
Broken'In'Fail
 
mukapahnpy's Avatar
 

Join Date: May 2004
Location: Da Ghetto
Drives: 99 GSX
Posts: 159
Re: Fuel Pump Woes

It appears my DIY band-aid fuel pump assembly is not up to the task. The pump was pumping alright, right back into itself inside the tank. Going to drill the inside diameter of the 90 degree bulk head.
__________________
Avatar = Small Turbo:confused:
mukapahnpy is offline   Reply With Quote
Old 08-05-2009   #6
mukapahnpy
Broken'In'Fail
 
mukapahnpy's Avatar
 

Join Date: May 2004
Location: Da Ghetto
Drives: 99 GSX
Posts: 159
Re: Fuel Pump Woes

The next time that I have to get back to the fuel pump assembly, I'm going to try some of that epoxy stuff. Probably better than JB Weld.
__________________
Avatar = Small Turbo:confused:
mukapahnpy is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:14 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.