WTB: L19's and fel pro permatorque

[Fran05]

I am looking for a set of new or used 6 bolt L19's and new fel pro permatorque head gasket. Let me know what you guys have.

Thanks

[turbotalon1g]

I have a permatorque that was used for about 5k miles max on a 16g car.

[Fran05]

Permatorque is non-reusable after being heat cycled. At least I wouldn't re-use it.

[Tachyon]

Originally Posted by Fran05

Permatorque is non-reusable after being heat cycled. At least I wouldn't re-use it.

That's funny, my little 20g made nearly 500lbs of TQ on a 3rd-time reused Permatorque that had been on 3 different engines, including sealing on one that was bored .080 over.

[Fran05]

Originally Posted by Tachyon

That's funny, my little 20g made nearly 500lbs of TQ on a 3rd-time reused Permatorque that had been on 3 different engines, including sealing on one that was bored .080 over.

[CornFed2.4]

If tachyon did it I'd trust what he says over hear say on the Internet. He's one of the most knowledgable persons on this forum.

But it is your money. So just buy new.

Here's the best deal I could find

http://www.extremepsi.com/store/prod...cat=269&page=1

[Chim55117]

Also have a Permatorque HG. Pulled it when I separated my head and block, less than 50 miles on it. Give me a PM if interested.

[Pushit2.0]

wow, there is now a market for used permatorque HG's.... just pick up a new one from MAP, its as cheap as they come that way. Or if your that strapped for cash pick up a factory style composite gasket, I make 550FWHP on one and you can find them for less then $20.