10-11-2004
|
#1
|
Join Date: Oct 2004
Location: LOUISIANA
Posts: 65
|
Need some advice since I know there will be people on here that have experience with these parts.
I'm gettin a Greddy turbo timer from a friend of mine who's brother bought it for his civic, but never used it. It's new in the box. I'm paying $70 for it which I know is a good deal. My question is "how the heck do I install this thing?" Do I really need the $15 wiring harness for it or can I hardwire it?
Injen intake pipe for a $100. Only a few months old, but has very little evidence of being used.
Greddy Profec B boost controller for $250 used.
Thinkin about makin top half of upper intercooler pipe outta 2.5 inch exhaust pipe. Already gettin lower half with 1G BOV flange for $50 used.
Gonna get 2.5 inch exhaust from the downpipe back for around $250 with a 5 inch tipped Hiayama muffler that I payed nothin for. Will this be good enough for a future 14b upgrade, or should I just go ahead and do 3 inch?
__________________
Type-Arrrrgh KILLA
"If it's never broke you're not driving it hard enough"
|
|
|
10-11-2004
|
#2
|
Can't Actually Wrench
Join Date: Oct 2003
Location: Inver Grove Heights, MN
Posts: 464
|
Well I wouldn't upgrade to a 14b. You are going to want to upgrade your downpipe as well, anyways a full 2.5 exhuast ive heard is good up to about 400hp.
|
|
|
10-11-2004
|
#3
|
Business as usual
Join Date: Oct 2003
Location: Isanti, MN
Drives: Dodge Viper and Honda Insight
Posts: 2,206
|
As far as the turbo timer goes, get the harness. You do not need it but it makes it almost plug and play.
Is your other upper IC pipe 2.5"? If not, you are going to have trouble connecting them. You will need an adapting coupler. I would just cut the stock upper IC pipe and use that.
As far as the exhaust, what are your future plans for the car? You will need a larger exhaust if you go with a large turbo. If you plan on keeping a 14b, 2.5" should be fine. What is the price difference?
__________________
97 Viper GTS
03 Mercedes CLK500 rollin on dubs...
|
|
|
10-11-2004
|
#4
|
Business as usual
Join Date: Oct 2003
Location: Isanti, MN
Drives: Dodge Viper and Honda Insight
Posts: 2,206
|
Quote:
Originally posted by Khadgar@Oct 11 2004, 12:46 PM
Well I wouldn't upgrade to a 14b.
|
I assume you haven't done the 14b upgrade as it is very worth while. A T25 can only get you 13.5's in the 1/4. The turbo just dies off top. A 14b can get you into the 12's with minimal mods and holds boost. As the cost of only ~150 for the swap, it is one of the best bangs for your buck for 2g owners.
__________________
97 Viper GTS
03 Mercedes CLK500 rollin on dubs...
|
|
|
10-11-2004
|
#5
|
Join Date: Oct 2004
Location: LOUISIANA
Posts: 65
|
Quote:
Originally posted by 92tsiawd84+Oct 11 2004, 11:52 AM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (92tsiawd84 @ Oct 11 2004, 11:52 AM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-Khadgar@Oct 11 2004, 12:46 PM
Well I wouldn't upgrade to a 14b.
|
I assume you haven't done the 14b upgrade as it is very worth while. A T25 can only get you 13.5's in the 1/4. The turbo just dies off top. A 14b can get you into the 12's with minimal mods and holds boost. As the cost of only ~150 for the swap, it is one of the best bangs for your buck for 2g owners. [/b][/quote]
I'm in the process of saving for a JDM 6 bolt swap. Friend of mine is importing engine, tranny, computer, and harness for $1000. The engine comes with a 14B so I figured I would just go with it when I did the swap instead of a 16G. I'm not trying to build a fast car for the 1/4 mile. I'm focused more on autocross so I want a turbo that will spool really quick.
Goin to pick up the intake tonight..........
__________________
Type-Arrrrgh KILLA
"If it's never broke you're not driving it hard enough"
|
|
|
10-11-2004
|
#6
|
Area code 166 represent
Join Date: Aug 2003
Location: Crystal, MN
Posts: 10,329
|
Quote:
Originally posted by 92tsiawd84+Oct 11 2004, 11:52 AM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (92tsiawd84 @ Oct 11 2004, 11:52 AM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-Khadgar@Oct 11 2004, 12:46 PM
Well I wouldn't upgrade to a 14b.
|
A T25 can only get you 13.5's in the 1/4. [/b][/quote]
I'm gonna disagree with that. The T25 can go faster, just not alot of people take the time to do it. I know a car that went 13.404 @ 101 on the T25 with no fuel management,, stock head, and stock motor.
__________________
'16 Focus ST - Daily Duty
'93 mr2 - Track car in progress
|
|
|
10-11-2004
|
#7
|
formerly ecoli
Join Date: Oct 2003
Location: On the dyno
Posts: 4,892
|
Why are you getting a JDM motor? Does your have crankwalk? The JDM motor will have lower compression, which isn't what you want for autocross.
|
|
|
10-11-2004
|
#8
|
Guest
|
just cut off ur exaust after the cat :bounce:
|
|
|
10-11-2004
|
#9
|
Join Date: Oct 2004
Location: LOUISIANA
Posts: 65
|
Quote:
Originally posted by brrrnntsshhhh@Oct 11 2004, 10:11 PM
just cut off ur exaust after the cat :bounce:
|
I already thought about doin that................ :woowoo:
__________________
Type-Arrrrgh KILLA
"If it's never broke you're not driving it hard enough"
|
|
|
10-11-2004
|
#10
|
Join Date: Aug 2003
Location: Blaine
Posts: 2,789
|
No do not do that.. it makes a perfictly good sounding car into a peace of shit!!! only do that if you are at a track..
-E
__________________
|
|
|
10-11-2004
|
#11
|
Join Date: Dec 2003
Posts: 556
|
I haven't ever heard of a nice sounding I4 in a car.
__________________
92 Talon AWD Auto - SCM61 powered
|
|
|
10-13-2004
|
#12
|
Business as usual
Join Date: Oct 2003
Location: Isanti, MN
Drives: Dodge Viper and Honda Insight
Posts: 2,206
|
Quote:
Originally posted by DSMStyle+Oct 11 2004, 04:22 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (DSMStyle @ Oct 11 2004, 04:22 PM)</td></tr><tr><td id='QUOTE'>
Quote:
Originally posted by 92tsiawd84@Oct 11 2004, 11:52 AM
<!--QuoteBegin-Khadgar
|
Quote:
@Oct 11 2004, 12:46 PM
Well I wouldn't upgrade to a 14b.
|
A T25 can only get you 13.5's in the 1/4.
|
I'm gonna disagree with that. The T25 can go faster, just not alot of people take the time to do it. I know a car that went 13.404 @ 101 on the T25 with no fuel management,, stock head, and stock motor. [/b][/quote]
Yeah, I also know that they wasted their money on a FMIC . It can happen but can be done for a lot cheaper by upgrading to a 14b. Save the cost of a FMIC and spend only $150 on a 14 setup and you would easily run 12's on race gas, same setup minus the IC.
__________________
97 Viper GTS
03 Mercedes CLK500 rollin on dubs...
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|